MasterTape® Profiles – Profile sealing tape for doors and windows
Elastic self adhesive construction tape. Specially designed to seal against air currents between the moving parts of windows and doors, to achieve the maximum comfort of the room, noise and heat insulation. Restores its original shape. Weatherproof. Available in three profiles:
D profile
P profile
E profile
- Frameworks of constantly opening doors and windows.
- Sealing and soundproofing of covers and other moving opening parts.
- Easy to use
- Flexible and resilient
- Easily assume shape of the surface and even adjusts to constantly changing gaps due to line extensions by temperature or moisture changes in wood surfaces
- Restores its original shape after opening the sealed parts
- Weatherproof
| Dimensions | 9 mm x 7 mm x 6 m (width x thickness x length) |
| 9 mm x 7 mm x 100 m (width x thickness x length) | |
| Color | white, brown |
Pre-test the compatibility of the tape to the surface and clearance.
Surfaces must be smooth, sound and free from cracks and damaged paint. Clean them with soap and water, but for best results use MasterClean PU. Wait for the surface to dry.
Separate the sealing tape along its length and use each part separately. Peel off the paper strip about 20 cm from the start. Push the beginning and pulling tape, remove the paper slowly. Cut tape at the end of each side without it bending at the corners.
In areas with larger irregularities (concave areas) and gaps larger than the size of the sealing tape is recommended unequal area to equal the remaining surface by puttying with MasterCryl Stacryl.
Best results are achieved when using the same band profile and provide adequate clearance for the purpose.
The ends of the strips to join in length should be cut opposite an angle of 45o at the height of the tape. This will ensure overlapping of the edges, thereby avoiding the possibility of opening the gap.
In all corners is recommended for joining strips be cut across the width, at an angle of 45o. This will ensure the continuation of the profile and better seal.
To trim the ends of the tape, use model knife or scissors.
Avoid cutting of edges with insufficiently sharp tools.
Do not tear the tape. This will form the rough edges that will affect the quality of the seal.
Do not make up unevenness or gaps larger than the size of the sealing tape with bonding of tape on tape.
In the deformed wooden frames is recommended upper parts of the surfaces to be planed to provide adequate clearance over the entire length.
Provide a gap of size smaller by at least 1 mm on the thickness of sealing tape.This is necessary to ensure adequate compression of the sealant to the contact surface.
- Keep the tape from high temperatures and direct sunlight during storage and transportation.
- Dispose of waste separately, with care for the environment at designated locations.
| Technical Data Sheet | |
| Package | box with profile D – 28 pcs. x 6m. |
| box with profile E – 28 pcs. x 6m. | |
| box with profile P – 28 pcs. x 6m. | |
| roller with profile D – 28 pcs. x 100 m | |
| roller with profile E – 28 pcs. x 100 m | |
| roller with profile P – 28 pcs. x 100 m | |
| Color | white, brown |
