↑ Return to Adhesives for wallpapers

Print this Page

MasterFix Normal – Polymer glue for wallpapers

MasterFix® Normal is a polymer glue for wallpapers designed specifically for comfort and quality work for bonding of different weight and density wall coverings. Dissolves rapidly and completely in water. Ready for use after 3 minutes.

Bonding of:

  • ordinary wallpapers
  • novamura (Foam Polyethylene)
  • volume vinyl coatings
  • embossed wallpapers
  • heavily embossed wallpapers

  • Super fast and easy preparation
  • Reliable and long lasting results
  • Contains a fungicide that inhibits the growth of mold
  • Easy slide of wallpaper for perfect fit the shapes
  • Easy sliding of wallpaper for perfectly fitting the shapes

Characteristic Unit Value
Appearance cream-colored flakes
Chemical structure A combination of specially selected polymers
Water Content mg/g 50 ÷ 100
Viscosity mPa.s 6000 ÷ 11000
pH 10 ÷ 11.5
Alkalinity 5 ÷ 9 μmol H+/0.04 g; < 0.5 mg NaOH/g
Volume of swelling ml ≥ 280
Sieve analysis 250 ÷ 725 mg/g on a sieve with a clearance 1 mm
≤ 70 mg/g on a sieve with a clearance 250 µm
Bulk density 250 ÷ 350 kg/m3

Surface preparation
Surfaces must be clean, degreased, dust free and without any contaminants that may impair adhesion. Tools must be clean, dry and degreased.

Priming
For slightly rough surfaces and fine cracks, fill with Master® Gold Bond, joints treated with MasterCryl® Acrylic. To improve adhesion, priming surfaces with a solution of MasterFix® Normal as described in the table below and let them dry completely before placing the wallpaper.

Preparation of adhesive solution
Measure the amount of cold water (as described in the table below), then slowly pour the contents of the package in water for 1 minute, stirring constantly. Leave the mixture for about 3 minutes, then stir vigorously to produce a homogeneous solution. The adhesive is ready for application.

Application
MasterFix® Normal is ready for use after dissolving in water. Apply by brush or roller on the wallpaper.

Preparation of solutions and coverage

Use Ratio Glue / Water Glue gr. L. Water Area m2 Number of rolls
Primer 1 : 45 125 5,5 55
Ordinary wallpapers 1 : 32,5 125 4 25 ÷ 30 5 ÷ 6
Vinyl wallpapers 1 : 27,5 125 3,5 25 5
Novamura 1 : 22,5 125 2,8 20 4
Embossed wallpapers 1 : 22,5 125 2,8 20 4
Volumetric vinyl wallpapers 1 : 22,5 125 2,8 10 ÷ 15 2 ÷ 3
Heavily embossed wallpapers 1 : 17,5 125 2,2 7,5 ÷ 12,5 1,5 ÷ 2,5

  • For better adhesion is recommended priming with solution on the basis of the adhesive as described in the above table. Do not use prepared for priming solution for direct bonding of wallpapers. In the event that has remained unused for priming solution, it can add to make the liquid for preparing an adhesive solution, respecting the proportions glue / fluid.
  • Follow strictly indication of gradually pouring the glue in water with constant stirring. Do not at once pour entire contents of package.
  • Stir well adhesive solution after waiting for the saturation of the mixture of 3 minutes before applying glue on wallpaper.
  • For application by roller is recommended to use a sponge roller.
  • When applying the glue with a brush, carrying the material uniformly over the entire surface with cross arm movements. Do not apply a thick layer of glue.
  • Best results are achieved at a temperature of operation about +20oC and relative humidity around 50%.

  • Store product in tightly closed packages in a cool, dry place.
  • Packaging is designed for storage of absorbent products. but proper storage is essential.

Technical Data Sheet Technical Data Sheet
Material Safety Data Sheet Material Safety Data Sheet
Package 22 х 125 gr., carton box
Color transparent after drying
Expiration date
24 months
VN:F [1.9.22_1171]
Rating: 10.0/10 (1 vote cast)
VN:F [1.9.22_1171]
Rating: +1 (from 1 vote)
MasterFix Normal - Polymer glue for wallpapers, 10.0 out of 10 based on 1 rating

Permanent link to this article: http://masterlinebg.com/en/?page_id=783

Flags Widget powered by AB-WebLog.com.